How to seal coping

[0:08] [Music] thank you on this video we're going to go over sealing the coping as you can see Isaac has gotten started here he's using a foam roller brush we're doing the top of the coping the side of the coping and then right underneath that lip of the coping he's actually not doing the tile underneath the coping just the coping itself and as you can see we're also not rolling any sealer on any pavers next to

[0:40] the coping we're only concerned about the coping in this situation so what normally happens is you've got two men on a job the first person is mixing the sealer in a five gallon bucket and then once they have the first batch mix we'll put a little sealer in a little half gallon bucket as you see here with the foam roller and then we send the second person out to at least get started sealing the coping and the reason we do it this way is so that we limit any

[1:11] sealer getting unnecessarily into the pool this helps contain sewer from getting in the pool and it's just a nice even look when you spray coping it can tend to get a little patchy because of how dense it is so that's why we like to do just one coat on the coping and we go all the way around the pool and like I said we're just doing the top middle and underneath that lip there and then we'll spray the rest of the of those pavers when it's

[1:42] time to spray but as you can see Isaac's getting ready to go on the other side here he'll do this until he gets the entire coping around the pool deck done [Music]