Source: Premier Pro Wash & Seal
[0:06] in this video we're going to discuss the extra and the purpose of the xjet as you can see we have a normal Twist on here now but there's going to be times where you're going to need a little stronger mix you throttle the machine down it still wasn't strong enough so now you've got to go to an alternative and we call that an x-jet The Twist looks I mean the end looks just like the twist so it's got a lot of similarities but you'll see the difference you take the twist off we'll set this over here
[0:38] and then the extra so the difference between the xjet and just the normal twist let me grab that again you'll see that there's a little port at the bottom of the xjet so this allows you to pull chemical right here at the end of the gun so why you can pull more a stronger mix is because when you're pulling that chemical it's getting pulled right here by the tip so it's not going through 200 feet of hose and getting diluted it's instead it's coming
[1:08] right here at the end that's why you'll get a stronger mix so the xjet will actually have a little Port down here where your draw tube will be so we'll put this to the side you would hook up your xjet twist similar to the regular twist make sure that's on strong and this drop tube will just drop into a bucket of whatever you need there's also um thing here you can cut this and make
[1:40] your own filter it comes like this design so if you drop this in the bucket and you start trying to use it it won't pull chemicals so make sure your valve is turned all the way uh parallel so that you can draw a chemical so you can spray here you can spray the wall or whatever you're cleaning when you're ready for water you can take it out of the bucket or you could simply turn it off here and now when you spray you would have water but this is a real good alternative for those tough stains that
[2:10] just need a little bit more juice