Sealing your pavers is the smartest way to protect your investment. When you seal your driveway, patio, pool deck, or lanai, it fills in the porous surface and defends against
- Stains
- UV rays
- Mold
- Weeds
- Moisture
Moisture is one of the greatest adversaries to pavers because they are extremely absorptive. This is the reason they stain so easily; they soak up any liquid that touches them. If they soak up chemicals, it can damage your pavers from the inside out.
When we apply a sealer, it creates a barrier that stops liquid from penetrating the pavers and adds to their natural beauty.
But there is more than one type of sealer.
You’ll hear terms like acrylic, solvent-based, or water-based along with glossy and wet look.
Answering what is the best sealer for pavers is easy, but we want to do more. You deserve to know exactly what you’re putting on your pavers, and how it will help them stay beautiful for years to come.
So we are doing more than telling you, ‘What is the best paver sealer.’ We want to share a true story with you about a customer of ours who learned the answer to this question the hard way.
The Solvent-Based Sealer Blues
A sweet couple in Florida hired contractors to seal their pavers. The paver sealing company chose to use a solvent-based sealer.
The couple heard how good solvent-based sealers were. The contractor told them it was exceptional at resisting wear and water. When they looked it up online, the information seemed to check out. People were raving about solvent-based sealers all over the nation.
Initially, the results looked great, and they were thrilled! Everyone complimented the appearance of their driveway, patio, and lanai.
Then, without warning, something horrible happened.
Their exquisite pavers were swept over in clouds. The surface became yellow, peeled, and chipped away in a grotesque state of deterioration.
Little did they know that the high humidity and frequent rain in their neighborhood left moisture inside the pavers. This water became trapped under the sealer and ruined the protective coating from the inside out.
You see, solvent-based sealers create one of the strongest water-tight seals. But this is bad because that protection works against the material when water is stuck under the surface!
These poor people were victims of bad sealing practices, ones that continue to ravage the state.
In our subtropical climate, achieving a 100% dry paver is impossible. It’s too wet here and professionals know that.
But the people who sealed their pavers
The truth is, Florida laws don’t regulate paver sealing companies. Anyone can buy the equipment and open a business. This is why it’s always important that you choose a trustworthy company with expert knowledge and plenty of experience.
So what happened to the couple with ruined pavers?
They asked their friends, “Who took care of your pavers?” And that’s how they learned about Premier Pro Wash & Seal.
After we received their call, we came to the rescue.
Sadly, we see a lot of these cases and hope you do not make the same mistake.
After carefully removing the solvent-based sealer and cleaning the surface thoroughly, we sealed their pavers with a professional-grade water-based sealer. It’s a two-part sealer which makes it much more durable than the stuff you’ll find in a home improvement store.
We knew that our choice to apply water-based sealer would leave them with a beautiful finish that would never flake, peel, or yellow. In fact, we guarantee it!
Every 2 years, they call us back to seal their pavers. Their property looks amazing, and the sealer increases their curb appeal tremendously.
Why Water Based Sealer is Best
In Florida, there is only one type of sealer you should use: water-based sealer.
Why?
Because it is unrivaled in humid conditions and superior on all outdoor paver surfaces!
The water-based sealer we use is NOT your average sealer. It is a top-quality commercial-grade breathable sealer that allows the pavers to release moisture.
The product is designed to allow water to evaporate. As the water base evaporates from your sealer and the pavers dry, the sealer also allows leftover moisture inside the bricks to leave too.
Eventually, you’re left with a bone-dry paver with a durable polymer barrier that protects the surface. With no water trapped under the substrate, your pavers will continue to look fantastic year after year.
Hire Premier Pro Wash and Seal for Your Home or Business
Premier Pro Wash and Seal believes that a premium two-part water-based sealer is the best option for your driveway, pool deck, or patio pavers. It is the preferred option for Floridians.
If you have questions or would like a free quote, get in touch with us today!